Поддержка по электронной почте:
WhatsAPP:
Newin QD-550 Commercial Meat Dicing Machine is designed for commercial meat processing where a higher output than the QD-350 is required. The current page states an output of 700–900 kg/h and describes processing for fresh meat and frozen meat at about -3 to -4°C. For the complete range, see our commercial meat dicing machines.
The QD-550 uses automatic pre-compression and a feeding system to move the material into the cutting area. Its main motor is rated at 2.2 kW and the oil pump motor at 1.5 kW. The machine uses SUS304 stainless steel construction. The cutting configuration can be selected for different finished sizes, with the current specification listing 5, 6, 7, 8, 9, 11, 13, 16, 20 and 27 mm options.
The QD-550 has a 120 × 120 × 550 mm cutting groove and a maximum filling material length of 550 mm. This larger feed dimension is an important point when comparing the model with the QD-350 meat dicing machine. If the required cube size, meat temperature or production target differs from the standard configuration, contact Newin before ordering to confirm the suitable knife and machine setup.
Wholesale and retail quotation requests are available through the product page. When requesting a quotation, provide the meat type, required cutting size, expected output and local electrical requirements so the machine configuration can be checked.
Технические характеристики
| Параметр | КД-550 | Buyer Note |
|---|---|---|
| Мощность главного двигателя | 2.2 kW | Relevant when comparing overall machine drive requirements. |
| Мощность двигателя масляного насоса | 1.5 kW | Part of the machine’s drive configuration. |
| Выход | 700–900 kg/h | Use as a reference; actual output depends on material and operation. |
| Материал | СУС304 | Relevant for routine cleaning and food-processing use. |
| Cutting Size | 5/6/7/8/9/11/13/16/20/27 mm, customizable | Match the knife configuration to the required finished size. |
| Cutting Groove Size | 120 × 120 × 550 mm | Check against the dimensions of the material being fed. |
| Максимальная длина наполнителя | 550 mm | Useful when comparing larger material sizes with smaller models. |
| Общий вес | 700 kg | Relevant to installation and handling. |
| Размеры | 1940 × 980 × 1100 mm | Check available floor space and access before installation. |
| Frozen Meat Condition | About -3 to -4°C, according to current page | Confirm the actual raw material condition before order. |
Why This Model May Fit Your Application
- Higher stated output: 700–900 kg/h, above the QD-350 specification.
- Larger feed dimensions: 550 mm maximum filling material length and a 120 × 120 × 550 mm cutting groove.
- Multiple cutting configurations: Selected sizes from 5 mm to 27 mm are listed as customizable.
Информация о B2B-заказах
- Wholesale and retail inquiries are accepted.
- Request Quote is available on the product page.
Core Components
Automatic Pre-Compression System
The current product page identifies automatic pre-compression as part of the machine design and connects it with more consistent cutting.
Feeding System
The page describes a screw-feeder working principle that continuously moves the material toward the cutting area.
Cutting Knife Configuration
The model supports multiple listed cutting sizes. Final configuration should follow the customer’s required finished size.
Идеальные приложения
- Мясоперерабатывающие заводы
- Commercial food preparation
- Operations requiring a higher stated output than the QD-350
Часто задаваемые вопросы
What is the output of the QD-550?
The current specification lists an output of 700–900 kg/h. Actual output can vary with the product and operating conditions.
What cutting sizes are available on the QD-550?
The current page lists 5, 6, 7, 8, 9, 11, 13, 16, 20 and 27 mm cutting configurations, with customizable options.
Can the QD-550 process frozen meat?
Yes. The product page states that the machine can process frozen meat at about -3 to -4°C as well as non-frozen fresh meat. Confirm the actual raw material condition before ordering.
What is the maximum filling material length?
The current specification lists a maximum filling material length of 550 mm.
How is the QD-550 different from the QD-350?
The QD-550 has a higher stated output of 700–900 kg/h compared with 500–600 kg/h for the QD-350, and it has a larger 550 mm maximum filling material length.
Машина для нарезки кубиками замороженного и свежего мяса QD-350
